Heading
99% of our paints are easy and very simple to apply for a proper match. The three following paints are different. These paints require special applications to get the correct match.
When any of the three paints arrive, remove from box and turn upside down onto its lid. Allow to sit for 30 - 60 minutes to distribute the metallic to the rest of the bottle. After this shake as directed below.
Special Procedures for applying silver touch-up paint
Practice procedure on wood, cardboard or metal before applying to club
1. Shake very well until properly mixed and mixing balls are a dominate sound
2. Remove brush and wipe off stem and bristles with paper towel
3. Dip bristles into bottle and thinly coat with paint.
4. Apply thin coat by stroking ONE way, do not go backward over applied silver. (this will darken the finish and change the match)
5. Allow to dry and repeat 1-4 above
6. You may choose to lightly smooth between coats with a fine wet and dry sandpaper (600-1000 grit), or a fine steel wool.
6. You may choose to lightly smooth between coats with a fine wet and dry sandpaper (600-1000 grit), or a fine steel wool.
7. Apply the necessary coats to fill the scratches and chips. DO NOT hurry application
MATTE BLACK
Practice procedure on wood, cardboard or metal before applying to club
1. Shake very well until properly mixed and mixing balls are a dominate sound
2. Remove brush and wipe off stem and bristles with paper towel
3. Dip bristles into bottle and thinly coat with paint.
4. Practice coating a thin coat until desired match is accomplished. NOTE: Heavier you apply, the darker and shinner the finish will be. The formula is correct, but requires the right amount of paint
for proper match. You can not puddle this paint and get a correct match.
5. Allow to dry and repeat 1-4 above
6. You may choose to lightly smooth between coats with a fine wet and dry sandpaper (600-1000 grit), or a fine steel wool.
7. Apply the necessary coats to fill the scratches and chips. DO NOT hurry application
Nike Covert Red
This is a high metallic mixture of tri-color paints which will change colors if NOT applied correctly. Do not put on heavy, or too much at one time which will cause the
paint to dry dark. Apply one direction only. Do not back across applied paint. Apply thin coats only and allow to dry before applying additional coats. SHAKE VERY WELL before application. Follow
below directions. Procedure #1 is CRITICAL!!!!
Practice procedure on wood, cardboard or metal before applying to club. Practice procedure until match is the same as club.
1. Shake very well until properly mixed and mixing balls are a dominate sound. Turn upside down and notice color in bottom of bottle. This will usually be a orange metallic You need
to shake until this color is the same as the red in the rest of the bottle. The turning of color will usually start in the middle of the bottom of bottle and slowly spread through-out the
entire bottle after shaking. It may take as long as 5 minutes and opening the top a few times, relieving the pressure inside for easier mixing.
2. Remove brush and wipe off stem and bristles with paper towel
3. Dip bristles into bottle and thinly coat with paint.
4. Apply thin coat by stroking ONE way, do not go backward over applied paint. (this will darken the finish and change the match)
5. Allow to dry and repeat 1-4 above
6. You may choose to lightly smooth between coats with a fine wet and dry sandpaper (600-1000 grit), or a fine steel wool.
7. Apply the necessary coats to fill the scratches and chips. DO NOT hurry application
TM r15 aero burner 2015 TM RBZ and Black R1 2014 Most Pop Paints
TM r15 black crown Ping g30 2015 Callaway V Series 2015
Cleveland Black Club 2015 Titleist 915 2015 Callaway Big Bertha Alpha 2015
Nike Vapor Series 2015 Callaway XR Matte Black 2015 2015 Paints TM Putters TM Putters 2 Taylormade M1 White
Print